Emtek Appliance Pulls

Emtek Appliance Pulls for Panel-Ready Refrigerators & Dishwashers

Emtek appliance pulls provide larger-format handles for compatible panel-ready refrigerators, freezers, dishwashers, and other applications that call for appliance-scale hardware. By selecting a pull that coordinates with nearby cabinet knobs and pulls, homeowners and designers can carry a consistent hardware style across both cabinetry and integrated appliances.

Coastal Hardware Store is an authorized seller of Emtek hardware and carries appliance pulls across modern, transitional, industrial, traditional, and bronze-inspired styles. The current collection includes designs such as Jasper, Westwood, Alexander, Bar, Bauhaus, Blythe, Trinity, Habitat, Riviera, Westridge, Sandcast Bronze Rail, Tuscany Bronze Fluted, and customizable SELECT appliance pulls. For coordinating smaller hardware, browse our Emtek cabinet pulls.

Why Choose Emtek Appliance Pulls?

Emtek offers appliance pulls in a range of designs, center-to-center measurements, finishes, textures, and mounting configurations. The right pull depends on the appliance or panel specifications, required mounting method, available space, desired proportions, and the cabinet hardware being used throughout the kitchen.

• Designed for paneled appliances: Emtek identifies its appliance pulls for use with paneled kitchen appliances such as refrigerators and dishwashers.
• Multiple design styles: Current options range from clean bar pulls and midcentury designs to industrial, transitional, and bronze hardware.
• Larger-scale proportions: Appliance pulls are offered in longer center-to-center measurements than many standard cabinet pulls, with available sizes varying by design.
• Multiple mounting options: Supported Emtek appliance pulls can be ordered with standard, concealed-surface, or back-to-back mounting depending on the product.
• Customizable SELECT hardware: Emtek SELECT appliance pulls offer supported combinations of stem shapes, smooth or knurled textures, finishes, and extended sizes.
• Coordinating cabinet hardware: Many appliance-pull designs belong to families that also include cabinet pulls, knobs, finger pulls, or other coordinating hardware.
• Broad finish selection: The current collection includes brass, nickel, chrome, black, bronze, copper, unlacquered, and patina finishes depending on the product.

Types of Emtek Appliance Pulls Available

Standard Appliance Pulls

Standard Emtek appliance pulls provide a single handle mounted to the appliance panel using the mounting method specified for that product. Current designs include Bar, Jasper, Bauhaus, Trinity, Habitat, Riviera, Westwood, Alexander, Blythe, Spindle, and other architectural profiles.

Many designs are available in 12" and 18" center-to-center measurements, although sizing varies by product. Longer SELECT configurations are also available. Always use the center-to-center dimension rather than overall length when planning mounting-hole locations.

Emtek SELECT Appliance Pulls

Emtek SELECT appliance pulls provide additional customization through supported combinations of stem shape, pull texture, and finish. Current designs include rectangular-stem and bar-style configurations with smooth and knurled surfaces, while Emtek's expanded SELECT program adds additional stem and texture choices.

The SELECT system is particularly useful when you want appliance hardware to coordinate closely with compatible Emtek SELECT cabinet pulls, knobs, finger pulls, or other hardware. Available combinations vary by specific model, so configure the exact pull rather than assuming every stem, texture, finish, and size can be combined.

Concealed-Surface Appliance Pulls

Supported Emtek appliance pulls are available with concealed-surface mounting. This mounting approach is designed to reduce visible fastening hardware on the opposite side of the mounting surface compared with standard through-bolt configurations.

Coastal currently carries concealed-surface versions of SELECT, Habitat, Riviera, and other supported appliance pulls. Because concealed mounting has specific panel-thickness and preparation requirements, review the technical drawing and installation instructions for the exact pull before drilling.

Back-to-Back Appliance Pulls

Back-to-back mounting places compatible pulls opposite one another on the same door or panel and connects them through the mounting surface. Coastal currently carries back-to-back versions of several Emtek designs, including SELECT, Habitat, Riviera, and Westridge configurations.

Back-to-back hardware is different from a conventional appliance-panel installation, so verify that the intended application is compatible with this mounting method. Pull size, mounting-hole spacing, surface thickness, and required hardware should all be checked before ordering.

Bronze Appliance Pulls

The collection also includes Emtek bronze appliance hardware such as the Sandcast Bronze Rail and Tuscany Bronze Fluted Appliance Pulls. These designs provide a different texture and finish character from polished or plated brass hardware.

Emtek's bronze patina finishes are living finishes intended to develop visible changes with exposure and use. Shoppers who want a finish that remains visually consistent should review the manufacturer's finish characteristics before selecting a bronze patina option.

Appliance Pulls vs. Cabinet Pulls

Appliance pulls and cabinet pulls serve related purposes but are not automatically interchangeable. Appliance pulls are larger-format hardware intended for compatible paneled appliances and other applications that require appliance-scale dimensions and mounting. Cabinet pulls are generally sized for cabinet doors and drawer fronts.

The most important distinction is not simply overall length. Mounting method, center-to-center spacing, projection, number of mounting points, and the requirements of the appliance panel all matter. An oversized cabinet pull should not automatically be treated as an appliance pull simply because its appearance is similar.

When coordinating the two, look for an Emtek design family that offers both cabinet and appliance sizes. For example, Jasper and Bauhaus are currently offered in both cabinet-pull and appliance-pull formats, making it easier to maintain a related appearance across cabinetry and integrated appliances.

How to Choose the Right Emtek Appliance Pull

Start with the specifications of the panel-ready appliance rather than the pull style alone. Once the appliance and panel requirements are established, compare center-to-center spacing, overall length, projection, mounting method, finish, and coordinating cabinet hardware.

• Confirm the appliance is panel-ready: Verify that the refrigerator, freezer, dishwasher, or other appliance is designed to accept a custom panel and separately selected handle.
• Review appliance-manufacturer requirements: Follow the appliance manufacturer's instructions for panel construction, handle positioning, mounting points, and any limitations on hardware.
• Choose the center-to-center size: CTC is the distance between the centers of the mounting holes. Select the dimension required for the panel and desired hardware proportions.
• Check overall length: Overall length is different from center-to-center spacing and affects how the pull is visually proportioned on the appliance panel.
• Review projection: Make sure the handle provides appropriate grip and clearance without interfering with adjacent cabinetry, walls, countertops, or appliance doors.
• Select the mounting method: Determine whether the installation requires standard, concealed-surface, or back-to-back mounting and confirm that the chosen pull supports it.
• Consider door and panel thickness: Mounting hardware must be appropriate for the complete thickness and construction of the mounting surface.
• Coordinate with cabinet hardware: Look for related Emtek knobs and pulls if you want the appliance handle to share the same design language as the cabinetry.
• Use the exact finish designation: Match by Emtek's stated finish name and code rather than assuming similarly named finishes from other manufacturers will be identical.

Understanding Center-to-Center Measurements

Center-to-center measurement is the distance from the center of one mounting hole to the center of the next. This measurement is especially important with appliance pulls because it determines the location of the mounting hardware in the appliance panel.

Center-to-center spacing should not be confused with overall length. For example, a 12" center-to-center pull normally extends beyond those mounting points, so the finished handle is longer than 12". Projection—the distance the pull extends outward from the panel—is another separate measurement that should be reviewed.

Many current Emtek appliance-pull families offer 12" and 18" center-to-center sizes. Emtek SELECT also provides longer configurations on supported products. Do not choose a size solely because it is visually proportional to the appliance; confirm that the mounting location and panel construction meet both Emtek's and the appliance manufacturer's requirements.

Standard, Concealed-Surface & Back-to-Back Mounting

Emtek currently supports three primary appliance-pull mounting approaches on applicable products. The correct choice depends on what the pull is being mounted to and whether the opposite side of the mounting surface is accessible or visible.

• Standard mounting: Supported pulls use through-bolt hardware with fasteners passing through the mounting surface.
• Concealed-surface mounting: Designed for supported applications where a concealed fastening method is preferred and the surface can be prepared according to Emtek's requirements.
• Back-to-back mounting: Used when compatible pulls are installed opposite one another and connected through the same mounting surface.

Not every appliance pull, panel, door, or mounting surface supports every method. Use the installation documentation for the exact pull rather than choosing a mounting type solely by appearance.

Materials, Styles & Finishes

Material varies throughout Emtek's appliance-pull catalog. Emtek's broader manufacturer program includes appliance pulls made from materials such as brass, bronze, and stainless steel. Individual Coastal products provide more specific construction information—for example, the current Bar Appliance Pull is identified as solid brass, while the Sandcast Bronze Rail uses Emtek's bronze construction and patina finishes.

The current Coastal Hardware assortment includes finishes such as Flat Black, Lifetime Polished Nickel, Oil Rubbed Bronze, Polished Chrome, Satin Brass, Satin Nickel, and Unlacquered Brass on supported products. SELECT hardware also includes Satin Copper and additional configurable finish combinations, while Sandcast Bronze products are available in finishes such as Flat Black Bronze Patina, Medium Bronze Patina, and Tumbled White Bronze.

Finish availability varies by design, size, and mounting configuration. For example, a bronze appliance pull does not use the same finish program as a standard brass or SELECT pull. Check the exact product rather than assuming every Emtek appliance pull is offered in the same finish palette.

Emtek identifies Unlacquered Brass and specified Bronze Patina finishes as living finishes. These surfaces are intended to change naturally with exposure, touch, and age, so their evolving appearance should be considered part of the finish rather than a defect.

Featured Emtek Appliance Pull Styles

The current Coastal Hardware collection represents several Emtek design families, giving shoppers options from understated modern bars to textured industrial and bronze profiles.

• Jasper: Part of Emtek's Industrial Modern collection, Jasper combines jointed architectural detailing with 12" and 18" appliance-pull sizes and coordinating cabinet pulls.
• Bauhaus: A Midcentury Modern design with a substantial geometric profile and coordinating cabinet hardware.
• Bar: A clean, straightforward appliance-pull profile currently available in 12" and 18" center-to-center sizes.
• Trinity: A streamlined architectural design currently offered in appliance-scale dimensions and multiple finishes.
• Habitat: Available in standard, concealed-surface, and back-to-back configurations in the current Coastal collection.
• Riviera: Another design currently represented in standard, concealed-surface, and back-to-back mounting options.
• Sandcast Bronze Rail: A bronze appliance pull available in living patina finishes for projects where natural finish evolution is desired.
• Tuscany Bronze Fluted: Adds fluted detailing and bronze character for more traditional or textural hardware packages.
• SELECT: Customizable appliance pulls with supported combinations of stems, smooth or knurled textures, finishes, and multiple center-to-center sizes.

For cabinet knobs, cabinet pulls, appliance pulls, edge pulls, and additional coordinating products, browse our complete Emtek cabinet hardware collection.

Installation & Compatibility

Appliance pull installation should be planned around both the Emtek hardware and the appliance manufacturer's panel specifications. A panel-ready refrigerator or dishwasher can have specific requirements for panel material, thickness, handle position, fasteners, and clearance that are independent of the pull itself.

Before drilling, verify the pull's center-to-center spacing, overall dimensions, projection, mounting method, screw requirements, and mounting-surface thickness. Also confirm that the handle position will not interfere with adjacent cabinetry, walls, appliance hinges, or another handle when doors are opened.

Many current Emtek appliance pulls are sold as complete sets with the required pull-specific screws, but mounting requirements vary by configuration. Concealed-surface and back-to-back versions use different hardware from standard installations, and specialized mounting options should be installed according to the corresponding Emtek documentation.

Emtek also offers supported appliance pulls with specialized glass-door mounting options. Glass compatibility should be confirmed for the exact pull, glass thickness, mounting kit, and application rather than assumed for every product in this collection.

Shipping & Warranty Information

• Shipping: Most Emtek appliance pulls currently list an estimated fulfillment time of 5-7 business days. Quick Ship products, when designated, usually leave the warehouse within 2-3 business days. Orders of $100 or more qualify for free standard ground shipping within the contiguous 48 states and Washington, D.C. View Shipping Policy.
• Warranty: Emtek provides a lifetime limited warranty against defects in material and workmanship to the original qualifying residential consumer for as long as that consumer occupies the premises where the product was originally installed, subject to the manufacturer's terms and exclusions. Finish coverage varies: designated Lifetime finishes receive lifetime limited finish coverage, many other finishes receive five-year coverage, and specified patina and Unlacquered Brass finishes receive no finish warranty.

Frequently Asked Questions About Emtek Appliance Pulls

What is the difference between an appliance pull and a cabinet pull?

Appliance pulls are larger-format handles intended for compatible panel-ready appliances and other applications requiring appliance-scale hardware. Cabinet pulls are generally sized for cabinet doors and drawers. Center-to-center spacing, mounting method, projection, and panel requirements should be checked rather than assuming a large cabinet pull can substitute for an appliance pull.

Where can Emtek appliance pulls be used?

Emtek specifically identifies its appliance pulls for paneled kitchen appliances such as refrigerators and dishwashers. Emtek also offers supported appliance pulls for certain door-pull applications. Always confirm the intended application, mounting method, and manufacturer requirements for the exact pull.

What sizes are available for Emtek appliance pulls?

Size varies by design. Many current Emtek appliance pulls are available in 12" and 18" center-to-center measurements, while supported SELECT products offer additional extended sizes. Compare center-to-center spacing, overall length, and projection for the exact product before ordering.

What mounting options are available for Emtek appliance pulls?

Supported Emtek appliance pulls can be ordered with standard, concealed-surface, or back-to-back mounting. Availability depends on the specific design and application, so verify the mounting option and required preparation on the individual product page.

Will an Emtek appliance pull fit any panel-ready refrigerator or dishwasher?

Not automatically. The appliance must support a custom panel and separately mounted hardware, and the panel must meet the appliance manufacturer's requirements for material, thickness, handle placement, and fastening. Compare those requirements with the dimensions and mounting specifications of the selected Emtek pull.

Can Emtek appliance pulls coordinate with Emtek cabinet hardware?

Yes. Many Emtek appliance-pull designs have coordinating cabinet pulls, knobs, finger pulls, or related hardware, and the SELECT program provides additional opportunities to coordinate finishes and textures. Use the exact Emtek finish designation when matching pieces throughout the kitchen.

Shop Emtek Appliance Pulls at Coastal Hardware Store

Coastal Hardware Store is an authorized seller of Emtek hardware and offers appliance pulls for compatible panel-ready refrigerators, freezers, dishwashers, and other supported applications. Compare standard, concealed-surface, back-to-back, bronze, and customizable SELECT pulls by center-to-center size, overall dimensions, projection, finish, and mounting requirements.

If you need help selecting an Emtek appliance pull size, choosing the correct mounting method, coordinating appliance and cabinet hardware, or checking a pull against your appliance-panel requirements, our team can help you review the available options. Contact us at support@coastalhardwarestore.com or call us at 561-808-2588.