Emtek Door Flush Bolts

Emtek Flush Bolts for Double & French Doors

Emtek flush bolts provide a discreet way to hold the inactive leaf of a compatible double or French door in place while allowing the active door to operate normally. Unlike a surface bolt mounted on the face of the door, a flush bolt is recessed into the door edge so most of the hardware remains out of sight when the doors are closed. This makes flush bolts especially useful when a clean, coordinated hardware appearance is important.

The current Coastal Hardware Store collection features the Emtek 6-inch Flush Bolt with 5/8-inch Radius Corners. The product measures 6 inches by 3/4 inch and is listed with a 1-inch bolt, with multiple Emtek finish options available for coordinating with nearby door hardware. Emtek's official product information states that its flush bolts are sold as complete sets with screws and a strike plate. For additional manufacturers and configurations, browse our complete flush bolt collection or compare surface bolts.

Why Choose an Emtek Flush Bolt?

An Emtek flush bolt can be a practical choice when a paired-door opening needs one leaf to remain stationary until intentionally released. The correct application depends on the door configuration, existing preparation, required bolt location, corner shape, and finish.

• Concealed installation: Flush bolts are recessed into the edge of the door rather than mounted prominently across its face.
• Designed for inactive door leaves: The bolt helps hold the normally stationary leaf of a compatible double-door system in place while the active leaf remains available for everyday use.
• Manual operation: The current Emtek flush bolt is manually engaged or released rather than operating automatically with the active door.
• Radius-corner preparation: The current Coastal Hardware Store product uses 5/8-inch radius corners, making corner shape an important compatibility measurement for replacement projects.
• Multiple coordinating finishes: The current product is offered in nine Emtek finishes that can be compared with compatible knobs, levers, handlesets, hinges, and other visible hardware.
• Complete-set components: Emtek states that its flush-bolt sets include screws and a strike plate, reducing the need to identify those basic components separately.

Types & Applications of Emtek Flush Bolts

6-Inch Radius-Corner Flush Bolts

The current Coastal Hardware Store collection centers on Emtek's 6-inch flush bolt with 5/8-inch radius corners. The product is listed as 6 inches by 3/4 inch with a 1-inch bolt. Because the corner shape and body dimensions affect the required mortise, compare those measurements with the door preparation before ordering a replacement.

Manual Flush Bolts

A manual flush bolt is operated directly by the user when the inactive door needs to be secured or released. This differs from an automatic flush-bolt system that interacts mechanically with the active door. The current Emtek product should therefore be selected for an opening designed around manually operated inactive-door hardware.

Flush Bolts for Double & French Doors

Flush bolts are commonly used on paired doors where one leaf normally remains stationary. Depending on the complete door system, a flush bolt may secure the inactive leaf toward the head of the frame, toward the sill or floor, or at both locations. The exact number and placement of bolts should follow the door manufacturer's preparation and the hardware plan for the opening.

Flush Bolts for Coordinated Emtek Hardware

Because the current product is available in several Emtek finish families, it can be coordinated visually with compatible Emtek door knobs, levers, handlesets, hinges, and other accessories. For additional coordinating products, browse our Emtek hardware, Emtek door knobs, and Emtek door levers.

Flush Bolts vs. Surface Bolts

Both flush bolts and surface bolts can be used to hold an inactive door leaf in place, but they mount differently. A flush bolt is recessed into the edge of the door for a more concealed installation. A surface bolt mounts directly to the face of the door and remains visible. The better choice depends on the existing door preparation, desired appearance, and installation requirements.

How to Choose the Right Emtek Flush Bolt

Start with the existing door preparation rather than the finish. Flush bolts are mortised hardware, so dimensions and corner shape are especially important when replacing an existing bolt or preparing a new door.

• Confirm the door configuration: Determine which leaf is active and which is inactive and verify how the inactive leaf is intended to be held in its closed position.
• Measure the existing preparation: Compare the mortise length, width, depth, screw locations, bolt opening, and strike location with the dimensions of the selected Emtek product.
• Check the corner shape: The current Coastal product has 5/8-inch radius corners. A square-corner preparation should not automatically be assumed compatible without modification.
• Review bolt placement: Determine whether the door system requires a flush bolt at the top, bottom, or both locations. That decision depends on the construction and hardware arrangement of the complete paired-door opening.
• Confirm the receiver or strike location: The bolt must align properly with the supplied strike and the door frame, sill, floor, or other intended receiving surface.
• Coordinate the exact finish: Use Emtek's complete finish name when matching the bolt with hinges, door knobs, levers, handlesets, or other visible hardware.

Materials, Styles & Finishes

The current Emtek and Coastal Hardware Store information I reviewed does not identify one verified base material for this specific flush bolt, so the collection should not make a universal solid-brass, stainless-steel, or other material claim unless that specification is added to the product documentation. The important published specifications for the current product are its dimensions, radius-corner configuration, bolt size, finish choices, and included hardware.

Current collection finishes include Flat Black, French Antique, Lifetime Polished Brass, Lifetime Polished Nickel, Medium Bronze Patina, Oil Rubbed Bronze, Satin Brass, Satin Nickel, and Tumbled White Bronze. Availability should still be confirmed on the product page at the time of purchase.

Finish behavior and warranty coverage are not identical. Emtek's current warranty provides lifetime limited finish coverage for Lifetime Polished Brass and Lifetime Polished Nickel. Medium Bronze Patina and Tumbled White Bronze are among the finishes for which Emtek currently provides no finish warranty, while other applicable finishes generally receive five-year limited finish coverage under the published terms.

Patina finishes are intended to change in appearance with time and use. If the flush bolt will be coordinated with other Emtek hardware, use the same manufacturer finish whenever possible and remember that naturally aging finishes may develop individual variation.

Featured Emtek Flush Bolt Details

The current Coastal Hardware Store Emtek flush-bolt collection is focused rather than broad. At present, the collection contains one product configuration with several selectable finishes.

• 6-inch overall size: The current product is listed as a 6-inch flush bolt and measures 6 inches by 3/4 inch.
• 5/8-inch radius corners: The faceplate uses rounded corners rather than a square-corner profile, which should be matched to the door preparation.
• 1-inch bolt: Coastal Hardware Store currently lists the product with a 1-inch bolt.
• Nine current finish options: Shoppers can compare black, brass, nickel, bronze-patina, antique, and other Emtek finish families currently represented in the collection.
• Complete-set hardware: Emtek's official product information states that the flush bolt is supplied as a complete set with screws and a strike plate.

Installation & Compatibility

Flush bolts require mortise preparation in the edge of the door, so installation is more involved than simply fastening a surface bolt to the door face. Before cutting or drilling, use the exact dimensions and installation information for the selected Emtek product and verify the location of the bolt relative to the door frame, floor, sill, astragal, or other receiving surface.

The current product's 5/8-inch radius corners are particularly important for replacement work. An older square-corner flush bolt, a different overall length, or another manufacturer's product may use a different mortise. Even if two flush bolts appear similar, their faceplate dimensions, corner radius, screw positions, bolt geometry, and strike preparation can differ.

Accurate alignment between the bolt and strike is also essential. The bolt should enter its receiver without binding or forcing the inactive door out of alignment. On paired doors, the inactive leaf should be properly positioned before the strike location is finalized so the active door can close and operate as intended.

When the installation involves a custom entry door, metal door, unusual sill, existing astragal system, fire-rated opening, or other specialized assembly, confirm compatibility with the door manufacturer or a qualified door-hardware professional before modifying the door. The current product information should not be used to infer a fire rating or other certification that is not specifically documented.

Shipping & Warranty Information

• Shipping: The current Emtek 6-inch Flush Bolt listing shows an estimated fulfillment time of 5-7 business days. Coastal Hardware Store's general policy states that Quick Ship items usually leave the warehouse in 2-3 business days and other products average 5-7 business days unless another estimate appears on the product page. Orders of $100 or more qualify for free standard ground shipping within the contiguous 48 states and Washington, D.C. View Shipping Policy.
• Warranty: Emtek's current lifetime limited warranty covers defects in material and workmanship for the original consumer user while that person occupies the residential premises where the product was originally installed, subject to the complete terms and exclusions. The warranty is non-transferable and excludes commercial and common-area applications. Finish coverage varies by finish, so review Emtek's current warranty for the selected finish before ordering.

Frequently Asked Questions About Emtek Flush Bolts

What is an Emtek flush bolt used for?

An Emtek flush bolt is designed to hold the inactive leaf of a compatible double-door opening in place while allowing the active door to operate normally. The bolt is recessed into the edge of the door rather than mounted prominently on its face.

Do I need one or two flush bolts on a double door?

It depends on the door system. Some inactive leaves are secured at both the top and bottom, while other openings use a different hardware arrangement. Follow the door preparation, astragal design, and hardware plan for the complete opening rather than assuming every double door requires the same number of bolts.

What is the difference between a flush bolt and a surface bolt?

A flush bolt is mortised into the edge of the door for a largely concealed installation. A surface bolt is fastened to the face of the door and remains visible. Both can help hold an inactive door leaf in place, but their installation requirements and finished appearance are different.

What size Emtek flush bolt is currently available in this collection?

The current Coastal Hardware Store collection features an Emtek 6-inch Flush Bolt with 5/8-inch Radius Corners. The product is listed as 6 inches by 3/4 inch with a 1-inch bolt. Compare those dimensions with the existing preparation before ordering.

What finishes are available for the Emtek flush bolt?

The current collection includes Flat Black, French Antique, Lifetime Polished Brass, Lifetime Polished Nickel, Medium Bronze Patina, Oil Rubbed Bronze, Satin Brass, Satin Nickel, and Tumbled White Bronze. Availability can change, so confirm the selected finish on the product page.

Does the Emtek flush bolt include mounting hardware?

Emtek's current official product information states that its flush bolts are sold as complete sets and include screws and a strike plate. Additional installation materials or preparation may still be required depending on the door, frame, sill, or other receiving surface.

Shop Emtek Flush Bolts at Coastal Hardware Store

Coastal Hardware Store offers Emtek flush-bolt hardware for compatible double doors, French doors, renovations, replacement projects, and coordinated Emtek hardware packages. The current collection features the 6-inch radius-corner flush bolt in multiple finish choices for shoppers who need concealed inactive-door hardware.

If you need help determining whether the 6-inch radius-corner model matches an existing mortise, deciding where flush bolts should be located on a paired-door opening, or coordinating the finish with other Emtek hardware, our team can help you review the available information before ordering. Contact us at support@coastalhardwarestore.com or call us at 561-808-2588.