Linnea Cabinet Pulls

Linnea Cabinet Pulls for Modern Kitchens & Cabinetry

Linnea cabinet pulls bring clean architectural lines and stainless-steel construction to kitchens, bathrooms, built-ins, closets, furniture, and custom cabinetry. The current collection includes conventional surface-mounted cabinet pulls, low-profile finger pulls, recessed flush pulls, and substantial appliance pulls, giving shoppers several ways to carry a consistent modern hardware style throughout a room.

Coastal Hardware Store is an official retailer of Linnea hardware. The current Linnea cabinet pull collection includes products in Polished Stainless Steel, Satin Stainless Steel, Satin Black, and Satin Brass, with available finishes varying by model. Many designs are offered in several lengths or center-to-center measurements, so shoppers can coordinate smaller cabinet doors and drawers with larger panels and appliances while maintaining a related design language. For additional options, browse our Linnea appliance pulls, complete cabinet pull collection, and cabinet knobs.

Why Choose Linnea Cabinet Pulls?

Linnea cabinet hardware is especially well suited to projects where minimalist styling, precise proportions, and coordinated stainless-steel hardware are priorities. The right pull depends on the cabinet dimensions, existing hole spacing, desired projection, mounting method, finish, and the amount of grip needed for everyday use.

• 304 stainless-steel construction: Linnea identifies its current cabinet, recessed, and appliance pull families as 304 stainless steel with corrosion-resistant properties.
• Modern architectural styling: Clean cylindrical, rectangular, flat-bar, finger-pull, and recessed profiles complement contemporary and minimalist cabinetry.
• Multiple hardware formats: The current collection includes standard cabinet pulls, finger pulls, recessed pulls, and appliance-size handles.
• Wide size selection: Many Linnea pulls are offered in multiple center-to-center measurements or overall lengths for small drawers through large cabinet and appliance panels.
• Four primary finish families: Current options include Polished Stainless Steel, Satin Stainless Steel, Satin Black, and Satin Brass, although availability varies by product.
• Coordinated hardware collections: Several Linnea cabinet pulls have corresponding appliance pulls and can also coordinate with other Linnea door, bath, and architectural hardware.

Types of Linnea Cabinet Pulls Available

Standard Cabinet Pulls

Linnea standard cabinet pulls mount to the face of a cabinet door or drawer using two mounting points. Current designs include round, rectangular, flat, and streamlined bar profiles. Products such as the 1092, 142, 146, 155, 156, and 2054 families offer different bar shapes and several center-to-center sizes, allowing shoppers to match the scale of the pull to the cabinetry rather than using one size throughout an entire kitchen.

Bar-Style Cabinet Pulls

Bar pulls are one of the most recognizable Linnea cabinet-hardware formats. The 155 uses an angular cylindrical profile, the 1092 combines a rectangular face with a rounded back, the 146 uses a thin rectangular face with square posts, and the 156 combines round posts with a flatter bar surface. These differences may look subtle online but can noticeably affect the grip and visual weight of the installed hardware.

Finger & Edge-Style Pulls

Linnea finger pulls provide a lower-profile alternative to a conventional projecting handle. Current manufacturer designs such as the 220, 221, 223, and 224 mount at or near the edge of the cabinet and use an extended or cylindrical lip for gripping. Because the mounting direction, projection, lip dimensions, and screw placement differ among styles, review the technical drawing for the exact model before preparing new cabinetry.

Recessed Cabinet Pulls

The current collection includes round, square, oval, and rectangular recessed pulls. These products are installed partly or fully into the cabinet or panel surface to reduce projection and create a more integrated appearance. Linnea's current RPS and RPR families use 304 stainless steel and include compact 50mm and 66mm formats along with larger 90mm, 102mm, and 150mm designs. Recessed hardware generally requires routing or a cutout rather than simple drilled screw holes.

Linnea Appliance Pulls

Appliance pulls make up a significant portion of the current collection and are designed for larger panels such as refrigerators, freezers, dishwashers, ovens, and other compatible applications. Current Linnea appliance-pull families include several mounting configurations, including surface mount, through-bolt, and back-to-back options on supported models. Appliance pulls should not be substituted for an ordinary cabinet pull without checking the panel construction, mounting method, dimensions, and fastener requirements.

How to Choose the Right Linnea Cabinet Pull

Start by identifying whether you are replacing existing hardware or drilling new cabinetry. Replacement projects are primarily constrained by existing hole spacing, while new cabinetry gives you more flexibility to choose proportions based on the drawer or door size.

• Measure center-to-center spacing: For a two-screw pull, measure from the center of one mounting hole to the center of the other. Do not use overall pull length as a substitute for center-to-center measurement.
• Compare overall length: Two pulls with the same general style may extend different distances beyond their mounting points. Check the complete dimensions when visual proportion is important.
• Check projection and grip: Projection determines how far the pull stands away from the cabinet. Consider both hand clearance and nearby doors, drawers, walls, and appliance panels.
• Choose the appropriate hardware type: Standard pulls, finger pulls, recessed pulls, and appliance pulls have different mounting requirements and should not be treated as interchangeable simply because their finishes match.
• Match the installation method: Conventional pulls normally use drilled mounting holes, finger pulls mount along an edge or surface, recessed pulls require a cutout or routing, and appliance pulls may use surface, through-bolt, or back-to-back mounting.
• Coordinate the finish: Use Linnea's exact finish designation when coordinating cabinet pulls with appliance pulls, door hardware, towel bars, shower pulls, or other nearby hardware.

Materials, Styles & Finishes

Linnea's current cabinet-pull program is built around 304 stainless steel. Official manufacturer information for representative standard cabinet pulls, recessed pulls, and appliance pulls identifies the material as corrosion-resistant 304 stainless steel. This gives the collection a consistent material foundation even though the shape, gauge, projection, and mounting construction vary considerably by product.

Linnea's standard finish program includes Satin Stainless Steel and Polished Stainless Steel along with Satin Brass PVD and Black PVD. On Coastal Hardware Store, these finishes are currently presented as Satin Stainless Steel, Polished Stainless Steel, Satin Brass, and Satin Black. Availability varies by product, so confirm the exact finish shown for the selected size and model.

The collection is strongly contemporary in style but not visually uniform. Shoppers can choose cylindrical bar pulls, thin rectangular handles, broad flat profiles, edge-mounted finger pulls, round recessed cups, square recessed pulls, oval designs, and oversized appliance handles. That variation allows the hardware to remain coordinated without requiring every cabinet and appliance to use the identical handle.

Linnea also identifies additional PVD finishes as available by custom order for certain products. Those finishes should not be presented as standard Coastal Hardware Store collection options unless they are specifically offered on the product page or confirmed through a special-order quote.

Featured Linnea Cabinet Pull Collections

The current Linnea assortment includes several distinct product families that can be selected according to profile, size, grip, and coordinating appliance hardware.

• 1092: A minimalist bar pull with a rectangular face and rounded back. Linnea currently offers sizes from 96mm through 400mm center-to-center and identifies a matching AP-2092 appliance pull.
• 142 & 146: Slim rectangular designs for cabinetry where straight lines and a flatter visual profile are preferred. Each family has its own center-to-center measurements and proportions.
• 155 & 156: The 155 uses an angular cylindrical bar, while the 156 combines round posts with a flat-surface bar. Both are offered in multiple sizes and have matching appliance-pull families.
• 2054: A thin rounded-rectangular pull with several inch-based center-to-center options, including 4-inch, 5-inch, 6.5-inch, 8-inch, and 12-inch configurations.
• 220, 221, 223 & 224: Back- or top-mounted finger-pull designs with different projections, lips, and mounting positions for modern slab-front cabinetry.
• RPS & RPR Recessed Pulls: Round, square, and rectangular low-profile designs in multiple dimensions for cabinetry, furniture, sliding panels, and other compatible applications.

Installation & Compatibility

Installation requirements vary substantially across the Linnea collection. For standard two-post cabinet pulls, confirm the center-to-center spacing and screw size before drilling. Representative Linnea cabinet pulls use M4 hardware, but screw requirements and cabinet thickness should still be checked for the exact model.

When replacing existing cabinet hardware, use the existing hole spacing as the primary compatibility measurement. For example, a Linnea 1092 pull listed at 128mm center-to-center has a 135mm overall length, while the 300mm version measures 307mm overall. Matching overall length instead of center-to-center spacing can leave you with a beautiful pull and two very stubborn holes that refuse to cooperate.

Finger pulls require a different type of preparation. Depending on the model, they may mount to the back or top edge of the cabinet and use product-specific screw spacing, projection, and lip dimensions. Confirm that the cabinet construction provides sufficient material for the mounting screws and that the pull will clear adjacent panels.

Recessed pulls require the greatest preparation because material must generally be routed or cut away so the pull can sit within the surface. Follow the Linnea technical drawing and installation instructions for the exact RPS, RPR, or RPO model. Appliance pulls similarly require product-specific mounting, particularly when installing through glass or using a back-to-back configuration.

Shipping & Warranty Information

• Shipping: Current Linnea cabinet-pull listings generally show an estimated fulfillment time of 5-7 business days unless otherwise stated. Coastal Hardware Store provides free standard ground shipping on orders of $100 or more within the contiguous 48 states and Washington, D.C. View Shipping Policy.
• Warranty: Linnea's published general warranty information lists 10-year coverage for stainless-steel trims and accessories, including cabinet pulls and knobs, subject to its stated conditions and exclusions. The same documentation lists separate coverage for PVD finishes and powder coating. Because warranty terms can be updated, review Linnea's current warranty information or contact Coastal Hardware Store for the exact product before ordering.

Frequently Asked Questions About Linnea Cabinet Pulls

What are Linnea cabinet pulls made from?

Linnea identifies its current cabinet-pull, recessed-pull, and appliance-pull families as 304 stainless steel. Individual products vary in shape, dimensions, projection, and mounting design, but 304 stainless steel is the material used across the representative current collections reviewed.

What finishes are available for Linnea cabinet pulls?

The current Coastal Hardware Store collection offers Polished Stainless Steel, Satin Stainless Steel, Satin Black, and Satin Brass. Linnea describes the black and satin-brass versions within its standard finish program as PVD finishes. Not every finish is available on every current product.

How do I measure for a replacement Linnea cabinet pull?

Measure the center-to-center distance between the existing screw holes. That is the measurement that must match the replacement pull. Overall length is a separate dimension and is usually slightly greater than the center-to-center spacing on conventional bar pulls.

What is the difference between a standard and recessed cabinet pull?

A standard cabinet pull mounts to the face of the cabinet and projects outward from the surface. A recessed pull sits partly or fully within a routed or cut opening, producing a lower-profile installation. Recessed pulls therefore require different cabinet preparation.

Can Linnea cabinet pulls coordinate with appliance pulls?

Yes. Linnea specifically designs several cabinet-pull families to coordinate with corresponding appliance pulls. Examples include the 1092 with AP-2092, the 142 with AP-2512, the 146 with AP-2525, the 155 with AP-255, and the 156 with AP-256.

Are Linnea appliance pulls installed the same way as cabinet pulls?

Not necessarily. Standard cabinet pulls typically use two screws through a cabinet door or drawer front. Selected Linnea appliance pulls are available with surface, through-bolt, back-to-back, wood-mount, or glass-mount configurations. Follow the exact mounting instructions for the appliance pull and panel construction.

Shop Linnea Cabinet Pulls at Coastal Hardware Store

Coastal Hardware Store offers Linnea cabinet pulls for kitchens, bathroom vanities, closets, built-ins, furniture, appliance panels, renovations, and new construction. Compare standard bar pulls, finger pulls, recessed handles, and appliance pulls by center-to-center measurement, overall size, projection, mounting style, and finish.

As an official retailer of Linnea hardware, our team can help you match an existing center-to-center measurement, compare cabinet and appliance pulls, choose the right recessed-pull size, coordinate finishes, or review product-specific installation requirements. Contact us at support@coastalhardwarestore.com or call us at 561-808-2588.