Linnea Pocket Door Edge Pulls

Linnea pocket door edge pulls provide a convenient gripping point for retrieving a sliding pocket door from inside the wall opening. Installed along the narrow edge of the door, these compact pulls help maintain the low-profile appearance that makes pocket doors useful in spaces where projecting hardware may interfere with door travel.

The current Coastal Hardware Store collection includes three Linnea designs: the EP-300 Pocket Door Edge Pull, EP-500 Heavy Duty Pop-Out Pocket Door Edge Pull, and EP-600 Half-Moon Shaped Pocket Door Edge Pull. All three are manufactured from 304 stainless steel and offered in four coordinating Linnea finishes. For additional brands and designs, browse our pocket door edge pulls.

Why Choose Linnea Pocket Door Edge Pulls?

An edge pull can make a meaningful difference when a pocket door slides far enough into the wall that the narrow door edge becomes the practical place to retrieve it. Linnea offers several operating styles, allowing shoppers to choose between recessed and mechanically extending pull designs.

304 stainless-steel construction: Linnea specifies the EP-300, EP-500, and EP-600 as corrosion-resistant 304 stainless steel.
Three distinct pull designs: The current collection includes the streamlined EP-300, button-activated EP-500, and curved EP-600.
Low-profile operation: These pulls are designed to sit at or retract toward the door edge so the pocket door can maintain a clean, unobtrusive hardware profile.
Pop-out option: The EP-500 uses a button-activated mechanical release that extends the pull when needed and allows it to retract when not in use.
Four coordinated finishes: Current options include Satin Stainless Steel, Polished Stainless Steel, Satin Brass, and Satin Black.
Coordinates with Linnea pocket door hardware: The finish families align with those offered across Linnea's PL66 and PL160 pocket door hardware, making it easier to coordinate multiple components within a project.

Types of Linnea Pocket Door Edge Pulls Available

EP-300 Pocket Door Edge Pull

The Linnea EP-300 is a compact square-profile edge pull designed for use with pocket door hardware and recessed pulls. Linnea specifies a 100mm x 20mm face plate and a 22mm x 62mm bucket dimension. Its recessed gripping area provides a straightforward manual option without the extending mechanism used by the EP-500.

EP-500 Heavy Duty Pop-Out Edge Pull

The EP-500 adds a button-activated mechanical release to the edge-pull format. Pressing the mechanism reveals the pull for gripping the door, while the hardware retracts when not in use. Linnea specifies the EP-500 at 138mm long and 20mm wide and identifies it as a heavy-duty 304 stainless-steel design.

EP-600 Half-Moon Edge Pull

The EP-600 uses a curved, half-moon-style gripping profile rather than the rectangular presentation of the EP-300 or mechanical pop-out format of the EP-500. Linnea currently specifies the EP-600 at 100mm long and 20mm wide. This design provides another way to create an accessible grip while keeping the door-edge hardware compact.

How to Choose the Right Linnea Pocket Door Edge Pull

Start with how you want to retrieve the door, then compare the pull dimensions, operating mechanism, door-edge preparation, coordinating pocket door hardware, and finish. Because the EP-300, EP-500, and EP-600 use different designs, do not assume they require interchangeable preparation.

Choose the gripping style: Compare the recessed EP-300, button-activated pop-out EP-500, and curved EP-600 according to how you want to grip and retrieve the door.
Check the dimensions: The EP-300 and EP-600 are approximately 100mm long, while the EP-500 is approximately 138mm long.
Review the door preparation: Edge pulls are recessed into or mounted at the narrow edge of the door. Use the installation drawing or template for the exact model before cutting.
Plan other pocket door hardware: If the door also uses face pulls, privacy hardware, or a mortise lock, determine the complete hardware layout before preparing the door.
Consider the retrieval method: A mechanical pop-out pull may be preferable when you want the grip to extend on demand, while a fixed recessed design provides a simpler operating format.
Coordinate the finish: Use Linnea's exact finish designation when pairing the edge pull with PL66, PL160, or other Linnea pocket door components.

Materials, Styles & Finishes

The EP-300, EP-500, and EP-600 are all specified by Linnea as 304 stainless-steel edge pulls. The designs differ primarily in shape, dimensions, and operating method. The EP-300 uses a square recessed profile, the EP-500 incorporates a button-activated extending pull, and the EP-600 provides a curved gripping format.

Current collection options include Satin Stainless Steel, Polished Stainless Steel, Satin Brass, and Satin Black. Linnea identifies Satin Brass and Black as PVD finishes, while the Satin Stainless Steel and Polished Stainless Steel options retain the appearance of the stainless-steel material. All three products are currently represented in each of these four finishes.

Featured Linnea Edge Pull Designs

The current collection is focused on three Linnea edge pulls that provide different ways to retrieve a pocket door while maintaining a compact door-edge profile.

Linnea EP-300: A 100mm x 20mm 304 stainless-steel edge pull with a square face plate and recessed bucket-style gripping area.
Linnea EP-500: A 138mm x 20mm heavy-duty edge pull with a button-activated mechanical release that reveals the pull when needed.
Linnea EP-600: A 100mm x 20mm stainless-steel edge pull with a curved gripping profile, currently described by Coastal Hardware Store as a half-moon design.

If your project also requires locking or face-pull hardware, compare our Linnea square pocket door locks and Linnea round pocket door locks. For other manufacturers, browse the complete pocket door hardware collection.

Installation & Compatibility

Edge pulls require preparation at the narrow edge of the pocket door, so select the exact model before drilling, routing, or cutting. Linnea provides model-specific technical drawings and installation documents for these products, and the required opening differs according to the pull design.

The EP-300 uses a 100mm x 20mm face plate with a 22mm x 62mm bucket dimension. The EP-500 is a larger mechanical design measuring 138mm x 20mm and uses a button-activated release assembly. Linnea's current EP-500 installation diagram also specifies two #6 x 3/4-inch wood screws. The EP-600 measures 100mm x 20mm according to Linnea's current manufacturer specification.

For replacement projects, compare the existing cutout with the manufacturer's dimensions rather than selecting solely by the visible length of the old pull. If the edge pull will be combined with Linnea privacy or dummy pocket door hardware, verify whether an edge pull is already included with that set before purchasing an additional component.

Shipping & Warranty Information

Shipping: Current Coastal Hardware Store listings for the EP-300, EP-500, and EP-600 show an estimated fulfillment time of approximately 5-7 business days. Fulfillment can vary by finish or availability. Free ground shipping is available on qualifying orders over $99.99. View Shipping Policy.
Warranty: Linnea's current resources page provides product-care and maintenance guidance but does not publish a specific warranty duration for these edge pulls. Because older Linnea documentation may contain terms that no longer reflect the current policy, confirm current warranty coverage for the selected product before relying on a specific duration.

Frequently Asked Questions About Linnea Pocket Door Edge Pulls

What is a pocket door edge pull used for?

A pocket door edge pull provides a gripping point on the narrow edge of a sliding door so the door can be retrieved after it has moved into the wall pocket. It is separate from face-mounted pulls and from any privacy or locking mechanism unless the selected hardware set specifically combines those functions.

What is the difference between the Linnea EP-300, EP-500, and EP-600?

The EP-300 is a compact recessed edge pull with a square profile, the EP-500 uses a button-activated mechanical release that extends the pull when needed, and the EP-600 uses a curved half-moon-style grip. They also differ in dimensions and required door preparation.

Are Linnea pocket door edge pulls made from stainless steel?

Yes. Linnea specifies all three current products in this collection as corrosion-resistant 304 stainless steel.

What finishes are available for Linnea edge pulls?

The current collection includes Satin Stainless Steel, Polished Stainless Steel, Satin Brass, and Satin Black. Linnea identifies the Satin Brass and Black options as PVD finishes.

How large are Linnea pocket door edge pulls?

Linnea specifies the EP-300 at 100mm x 20mm, the EP-500 at 138mm x 20mm, and the EP-600 at 100mm x 20mm. Additional cutout, bucket, or mechanism dimensions vary by model, so review the applicable technical drawing before installation.

Do I need an edge pull if I already have a pocket door lock?

It depends on the hardware set and door configuration. Some Linnea pocket door sets include or pair with a specific edge pull, while other installations may require one to be ordered separately. Check the contents of the exact lock or pull set before adding an additional edge pull.

Shop Linnea Pocket Door Edge Pulls at Coastal Hardware Store

Coastal Hardware Store offers Linnea edge pulls for retrieving pocket doors while maintaining a compact, contemporary hardware profile. Compare the EP-300 recessed design, EP-500 button-activated pop-out mechanism, and EP-600 curved pull by dimensions, finish, operating style, and required door preparation.

If you need help choosing between the three Linnea edge-pull designs, determining whether your pocket door set already includes an edge pull, coordinating finishes, or checking installation dimensions, our team can help you review the available choices. Contact us at support@coastalhardwarestore.com or call us at 561-808-2588.

All Filters