All Filters
Recently viewed
Trimco Door Hardware & Kick Plates
Trimco manufactures architectural door hardware for commercial, institutional, hospitality, educational, retail, and other building applications. The current Coastal Hardware Store Trimco collection focuses specifically on K0050 stainless steel kick plates designed to protect the lower portion of doors from everyday contact, traffic, and wear.
Current options include 8" x 34", 10" x 34", and 12" x 34" Trimco kick plates in Satin Stainless Steel. All three belong to Trimco's K0050 family, which the manufacturer specifies as .050-inch protection plates. For additional products used in commercial openings, browse our commercial door hardware and door hardware accessories.
Why Choose Trimco Door Hardware?
Trimco specializes in architectural hardware and door-protection products for demanding building environments. The current Coastal Hardware Store assortment is centered on stainless steel kick plates that add a protective surface to the lower portion of compatible doors.
- Commercial door protection: Kick plates help shield the lower area of a door from routine contact associated with foot traffic, carts, cleaning equipment, and frequent use.
- .050-inch construction: The current products belong to Trimco's K0050 series, which the manufacturer specifies at .050 inch thick.
- Three current heights: Choose from 8-inch, 10-inch, and 12-inch-high kick plates, each currently offered in a 34-inch width.
- Satin stainless steel: All three products currently shown in the Coastal collection use Trimco's Satin Stainless Steel finish.
- Beveled edges: Trimco specifies pencil beveling on all four sides as standard for its current K Series kick plates.
- Commercial application range: Trimco identifies its kick plates for settings including commercial and industrial buildings, hospitality properties, K-12 schools, offices, and retail environments.
Types of Trimco Door Hardware Available
8" x 34" Trimco Kick Plate
The current Trimco 8" x 34" Kick Plate provides the most compact height in this Coastal Hardware Store collection. It belongs to the K0050 family and is offered in Satin Stainless Steel. An 8-inch plate can be considered when the project calls for lower-door protection without using the taller coverage provided by the 10-inch or 12-inch options.
10" x 34" Trimco Kick Plate
The Trimco 10" x 34" Kick Plate increases the protected height while maintaining the same 34-inch width. It uses the same K0050 .050-inch plate specification and Satin Stainless Steel finish as the other current products in the collection.
12" x 34" Trimco Kick Plate
The current 12" x 34" Trimco Kick Plate provides the greatest vertical coverage of the three products presently listed by Coastal Hardware Store. Its larger height may be useful where additional lower-door protection is desired, provided the dimensions are compatible with the door and surrounding hardware.
Trimco K0050 Kick Plates
Trimco identifies the K0050 as a .050-inch kick plate and lists the family for heights from 7 inches through 16 inches. The three standard configurations currently offered in this Coastal collection are 8, 10, and 12 inches high by 34 inches wide. Trimco manufactures additional plate sizes and configurations, but availability through Coastal Hardware Store should be confirmed before specifying a size that is not currently listed.
How to Choose the Right Trimco Kick Plate
Start with the dimensions of the door, then compare the plate height, width, mounting requirements, clearance around existing hardware, and the amount of lower-door coverage desired. Do not select a kick plate solely by appearance because door dimensions and installation conditions can vary.
- Measure the door width: The current Trimco plates are 34 inches wide. Confirm that this width is appropriate for the door and provides the desired side clearance.
- Select the plate height: Current options are 8, 10, and 12 inches high. Taller plates provide more vertical coverage but also occupy more of the lower door surface.
- Check surrounding hardware: Make sure the plate will not interfere with door sweeps, thresholds, louvers, glazing, signage, locks, or other components.
- Confirm the mounting method: Trimco documents screw and adhesive mounting options for its protection plates, but the current Coastal product listings do not identify which mounting configuration is supplied. Confirm this detail before ordering if the mounting method is important.
- Review project requirements: Commercial, institutional, healthcare, educational, or code-driven projects may have specifications that affect material, plate size, labeling, fasteners, or installation.
- Verify special options separately: Trimco offers options such as UL labeling, countersinking, security screws, heavy beveling, and custom cutouts on supported products. Do not assume these options are included with the standard Coastal listings.
Materials, Styles & Finishes
The current Coastal Hardware Store Trimco collection consists of K0050 kick plates in Satin Stainless Steel. Trimco's technical documentation specifies finish 630 as .050-inch stainless steel for this plate family. The K Series also uses pencil-beveled edges on all four sides as standard.
Trimco manufactures K Series protection plates in additional materials and finishes, including brass, bronze, stainless steel, and aluminum depending on the model and specification. However, the live Coastal Hardware Store collection currently shows only Satin Stainless Steel, so shoppers should not assume other Trimco finishes are available on these listings without confirmation.
Featured Trimco Kick Plate Sizes
The current Coastal Hardware Store assortment includes three versions of Trimco's K0050 stainless steel kick plate.
- Trimco 8" x 34" Kick Plate: The shortest current option, providing an 8-inch-high protective plate across a 34-inch width.
- Trimco 10" x 34" Kick Plate: A mid-height option with additional vertical coverage while retaining the same 34-inch width.
- Trimco 12" x 34" Kick Plate: The tallest current option, providing 12 inches of lower-door coverage across the same width.
For other components used in commercial openings, browse our commercial door hardware or door hardware accessories.
Installation & Compatibility
Before installing a kick plate, confirm the door dimensions, required plate position, clearance around existing hardware, and the appropriate mounting method. The current Coastal products measure 34 inches wide and are offered in 8-inch, 10-inch, and 12-inch heights.
Trimco states that K Series kick plates are pencil beveled on all four sides as standard and offers screw or adhesive mounting depending on how the plate is specified. The current Coastal listings do not state whether these individual SKUs are supplied for screw or adhesive mounting, so confirm the mounting configuration before drilling or applying adhesive to the door.
Trimco also offers options including countersinking, security screws, UL labeling, heavy beveling, custom cutouts, sizes, and shapes on supported K Series products. These are manufacturer options and should not be assumed to be included with the three standard products currently listed on Coastal Hardware Store.
Shipping & Warranty Information
- Shipping: The three current Trimco kick plate listings show an estimated fulfillment time of approximately 5-7 business days. Fulfillment can vary by product or availability. Free ground shipping is available on qualifying orders over $99.99. View Shipping Policy.
- Warranty: Trimco's currently published warranty terms do not state a conventional fixed warranty period for these kick plates. The manufacturer states that products are generally fit for the purpose for which they were designed when properly selected, installed, and not abused, and its published terms contain additional remedy, finish, and environmental limitations. Review Trimco's current warranty terms before purchase when coverage is an important project requirement.
Frequently Asked Questions About Trimco Door Hardware
What Trimco products are currently available in this collection?
The current Coastal Hardware Store Trimco collection contains three K0050 kick plates: 8" x 34", 10" x 34", and 12" x 34". All three are currently offered in Satin Stainless Steel.
What is the Trimco K0050 kick plate?
K0050 is Trimco's .050-inch kick plate family. Trimco currently lists the K0050 for plate heights from 7 to 16 inches, with additional sizing and configuration options available from the manufacturer. Coastal Hardware Store currently lists 8-inch, 10-inch, and 12-inch heights in a 34-inch width.
What material are the current Trimco kick plates made from?
The current Coastal products are Satin Stainless Steel kick plates. Trimco's technical documentation identifies finish 630 for this K0050 configuration as .050-inch stainless steel.
How do I choose the correct kick plate height?
Compare the available lower-door area and the amount of protection desired. The current collection offers 8-inch, 10-inch, and 12-inch heights. Check for interference with thresholds, sweeps, louvers, glass, signage, or other hardware before selecting a size.
Can Trimco kick plates be installed on existing doors?
They may be suitable for retrofit installation when the door dimensions, surface, mounting method, and surrounding hardware are compatible. Trimco offers screw and adhesive mounting options for its protection plates, so confirm the exact mounting configuration before installation.
Does Trimco manufacture other types of door hardware?
Yes. Trimco manufactures a much broader range of architectural hardware, including pulls and grips, pocket door hardware, push and pull plates, stops and holders, bolts, coordinators, door protection hardware, signage, viewers, knockers, and other specialty products. The current Coastal Hardware Store Trimco collection, however, is limited to three kick plates.
Shop Trimco Door Hardware at Coastal Hardware Store
Coastal Hardware Store currently offers Trimco K0050 kick plates in 8" x 34", 10" x 34", and 12" x 34" sizes for compatible commercial and architectural door applications. Compare plate height, door dimensions, mounting requirements, and surrounding hardware to choose the appropriate option for your opening.
If you need help selecting a Trimco kick plate size, confirming installation requirements, or determining whether another Trimco architectural hardware product is appropriate for a larger commercial project, our team can help you review the available options. Contact us at support@coastalhardwarestore.com or call us at 561-808-2588.